SHEETS, PLATES & COILS
- Nickel Alloy 200 Sheets & Plates
- Nickel Alloy 201 Sheets & Plates
- Monel Alloy 400 Sheets & Plates
- Monel Alloy K500 Sheets & Plates
- Inconel Alloy 600 Sheets & Plates
- Inconel Alloy 601 Sheets & Plates
- Inconel Alloy 625 Sheets & Plates
- Inconel Alloy 718 Sheets & Plates
- Inconel Alloy 800 Sheets & Plates
- Inconel Alloy 825 Sheets & Plates
- Alloy 20 Sheets & Plates
- Hastelloy B2 Sheets & Plates
- Hastelloy C22 Sheets & Plates
- Hastelloy C276 Sheets & Plates
- 304 Stainless Steel Sheets, Plates
- 304L Stainless Steel Sheets, Plates
- 304H Stainless Steel Sheets, Plates
- 310 Stainless Steel Sheets, Plates
- 310H Stainless Steel Sheets, Plates
- 316 Stainless Steel Sheets, Plates
- 316L Stainless Steel Sheets, Plates
- 316Ti Steel Sheets, Plates
- 316H Stainless Steel Sheets, Plates
- 317 Stainless Steel Sheets, Plates
- 317L Stainless Steel Sheets, Plates
- 321 Stainless Steel Sheets, Plates
- 347 Stainless Steel Sheets, Plates
- 904L Stainless Steel Sheets, Plates
STAINLESS STEEL 310 SHEETS, 310 STEEL PLATES & STEEL 310 COILS
Venus Special Metals is one of the specialized production house & dealer of Stainless Steel 310 Sheets , which is used for corrosion-resistant tools such as nutcracker. In metallurgy, it is a steel alloy with a minimum of 10.5 % chromium content by mass. Stainless Steel 310 Plates is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications. It does not readily corrode, rust or stain with water as ordinary steel does.
However, SS 310 Sheets is not fully stain – proof in low – oxygen, high – salinity, or poor air – circulation environments. There are various features and surface finishes of this stainless steel to suit the environment the alloy must endure. SS 310 Plates is used where both the properties of steel and corrosion resistance are required.
It differs from carbon steel by the amount of chromium present, where unprotected steel rusts readily when exposed to air and moisture. In comparison, Alloy 310 Sheets contain sufficient chromium to undergo passivation, forming an inert film of chromium oxide on the surface.
310 Stainless Steel Sheets is considered resistant to potable water with up to about 200 mg / L chlorides at ambient temperatures, reducing to about 150 mg / L at 60 Degree C. Venus Special Metals also offer these 310 Stainless Steel Plates in different sizes, shapes and designs as per clients’ specifications at reasonable price.
310 STAINLESS STEEL SHIM SHEET, STEEL 310 PLATES, STAINLESS STEEL 310 COILS & FOILS, UNS S31000 STEEL HAIR LINE SHEETS MANUFACTURER IN INDIA
![](https://venusspecialmetals.com/wp-content/uploads/2021/07/stainless-steel-310-coils-1.jpg)
![](https://venusspecialmetals.com/wp-content/uploads/2021/07/stainless-steel-310-sheets-1.jpg)
![](https://venusspecialmetals.com/wp-content/uploads/2021/07/stainless-steel-310-plates-1.jpg)
EQUIVALENT GRADES OF 310 STAINLESS STEEL PLATES, SHEETS & COILS:
STANDARD | WERKSTOFF NR. | UNS |
SS 310 | 1.4841 | S31000 |
310 STAINLESS STEEL PLATES, 310 STEEL SHEETS, & 310 STEEL COILS SPECIFICATION:
Grade | Stainless Steel 310 / UNS S31000 |
Specification | ASTM A240 / ASME SA240 |
Types | Sheets, Plates, Coils, Strip, Flats, Profile, Blank, Circle, Ring etc |
Form | Stainless Steel Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Etched Sheet, Embossed Sheet, Brush Sheet, No 4 Matt Pvc Sheet, Hair Line Sheet, etc |
Thickness | 0.3mm To 200mm |
Width | 200mm to 3000mm |
Length | 500mm to 12000mm |
Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc |
310 STAINLESS STEEL PERFORATED SHEET, STEEL CHEQUERED PLATE, STEEL 310 SHEET, STEEL 310 COILS, UNS S31000 STEEL FOILS & COILS, 310 STAINLESS STEEL NO 4 PVC SHEETS SUPPLIER & EXPORTER IN INDIA.
310 STAINLESS STEEL PLATES, SHEETS & COILS CHEMICAL COMPOSITION:
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 310 | 0.015 max | 2 max | 0.015 max | 0.020 max | 0.015 max | 24.00 – 26.00 | 0.10 max | 19.00 – 21.00 | 54.7 min |
STAINLESS STEEL 310 PLATES, SHEETS & COILS MECHANICAL PROPERTIES:
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
AVAILABLE TYPES OF 310 SS COILS, 310 SS FOILS, 310 SS PLATES & 310 SS SHEETS
- 310 Stainless Steel Plates
- Steel 310 Rolls
- UNS S31000 Ring
- Steel 310 Blank
- 310 SS Coils
- UNS S31000 Coils
- SS UNS S31000 Polished Plates
- Steel 310 Sheets
- 310 Steel Chequered Plate
- SS 310 Circles
- Steel 310 Flat
- Stainless 310 Profile
- UNS S31000 Steel Plates
- 310 SS Cold Rolled Plates
- SS 310 Shim Sheet
- 310 Steel Perforated Sheet
- Stainless 310 Coils
- 310 Steel Strips
- Stainless Steel 310 Foils
- UNS S31000 Steel Sheets
- SS 310 Hot Rolled Plates