SHEETS, PLATES & COILS
- Nickel Alloy 200 Sheets & Plates
- Nickel Alloy 201 Sheets & Plates
- Monel Alloy 400 Sheets & Plates
- Monel Alloy K500 Sheets & Plates
- Inconel Alloy 600 Sheets & Plates
- Inconel Alloy 601 Sheets & Plates
- Inconel Alloy 625 Sheets & Plates
- Inconel Alloy 718 Sheets & Plates
- Inconel Alloy 800 Sheets & Plates
- Inconel Alloy 825 Sheets & Plates
- Alloy 20 Sheets & Plates
- Hastelloy B2 Sheets & Plates
- Hastelloy C22 Sheets & Plates
- Hastelloy C276 Sheets & Plates
- 304 Stainless Steel Sheets, Plates
- 304L Stainless Steel Sheets, Plates
- 304H Stainless Steel Sheets, Plates
- 310 Stainless Steel Sheets, Plates
- 310H Stainless Steel Sheets, Plates
- 316 Stainless Steel Sheets, Plates
- 316L Stainless Steel Sheets, Plates
- 316Ti Steel Sheets, Plates
- 316H Stainless Steel Sheets, Plates
- 317 Stainless Steel Sheets, Plates
- 317L Stainless Steel Sheets, Plates
- 321 Stainless Steel Sheets, Plates
- 347 Stainless Steel Sheets, Plates
- 904L Stainless Steel Sheets, Plates
STAINLESS STEEL 316L SHEETS, 316L STEEL PLATES & STEEL 316L COILS
Venus Special Metals is one of the prominent trader and dealer of Stainless Steel 316L Sheets , which is a low carbon and nitrogen – enhanced version of Stainless Steel 316 molybdenum-bearing austenitic stainless steel. They are more resistant to general corrosion and pitting / crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as SS 304.
These Stainless Steel 316L Plates also offer higher creep, stress-rupture and tensile strength at elevated temperature. The nitrogen in this alloy adds additional resistance to sensitization in some circumstances. The nitrogen content of these SS 316L Sheets also provides some solid solution hardening, and raising its minimum specified yield strength compared to SS 316L. Like Types 316 and 316L, this alloy also offers good resistance to general corrosion and pitting / crevice.
These SS 316L Plates have two common variants, each represented as a separate material, and where the material properties section shows ranges encompassing all variants. The fatigue strength or endurance limit is the maximum stress below which a material is unlikely to fail in 10 million cycles in an air environment.
However, substantial variability of these 316L Stainless Steel Sheets in service results is experienced since additional variables such as corrosive conditions, type of loading and mean stress, surface condition, and other factors affect fatigue properties. Venus Special Metals also offer these 316L Stainless Steel Plates in different sizes, shapes and designs as per clients’ specifications at reasonable price.
316L STAINLESS STEEL SHIM SHEET, STEEL 316L PLATES, STAINLESS STEEL 316L COILS & FOILS, UNS S31603 STEEL HAIR LINE SHEETS MANUFACTURER IN INDIA
![](https://venusspecialmetals.com/wp-content/uploads/2021/11/stainless-steel-316l-coils.jpg)
![](https://venusspecialmetals.com/wp-content/uploads/2021/11/stainless-steel-316l-plates.jpg)
![](https://venusspecialmetals.com/wp-content/uploads/2021/11/stainless-steel-316l-sheets.jpg)
EQUIVALENT GRADES OF 316L STAINLESS STEEL PLATES, SHEETS & COILS:
STANDARD | WERKSTOFF NR. | UNS | EN | AFNOR | GOST | JIS | BS |
SS 316L | 1.4404 / 1.4435 | S31603 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | 03Ch17N14M3 / 03Ch17N14M2 | SUS 316L | 316S11 / 316S13 |
316L STAINLESS STEEL PLATES, 316L STEEL SHEETS, & 316L STEEL COILS SPECIFICATION:
Grade | Stainless Steel 316L / UNS S31603 |
Specification | ASTM A240 / ASME SA240 |
Types | Sheets, Plates, Coils, Strip, Flats, Profile, Blank, Circle, Ring etc |
Form | Stainless Steel Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Etched Sheet, Embossed Sheet, Brush Sheet, No 4 Matt Pvc Sheet, Hair Line Sheet, etc |
Thickness | 0.3mm To 200mm |
Width | 200mm to 3000mm |
Length | 500mm to 12000mm |
Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc |
316L STAINLESS STEEL PERFORATED SHEET, STEEL CHEQUERED PLATE, STEEL 316L SHEET, STEEL 316L COILS, UNS S31603 STEEL FOILS & COILS, 316L STAINLESS STEEL NO 4 PVC SHEETS SUPPLIER & EXPORTER IN INDIA.
AVAILABLE TYPES OF 316L SS COILS, 316L SS FOILS, 316L SS PLATES & 316L SS SHEETS
- 316L Stainless Steel Plates
- Steel 316L Rolls
- UNS S31603 Ring
- Steel 316L Blank
- 316L SS Coils
- UNS S31603 Coils
- SS UNS S31603 Polished Plates
- Steel 316L Sheets
- 316L Steel Chequered Plate
- SS 316L Circles
- Steel 316L Flat
- Stainless 316L Profile
- UNS S31603 Steel Plates
- 316L SS Cold Rolled Plates
- SS 316L Shim Sheet
- 316L Steel Perforated Sheet
- Stainless 316L Coils
- 316L Steel Strips
- Stainless Steel 316L Foils
- UNS S31603 Steel Sheets
- SS 316L Hot Rolled Plates