SHEETS, PLATES & COILS

200 NICKEL SHEETS, NICKEL ALLOY 200 PLATES & ALLOY 200 COILS

Venus Special Metals is one of the prominent trader and supplier of Nickel 200 Sheets , which is commercially pure wrought nickel and is normally limited to service at temperatures below 600 Degree F. At higher temperatures Nickel products can suffer from graphitization which can result in severely compromised properties. All hot working and cold working practices can be utilized when shaping Nickel 200 Plates, which are offered by Venus Special Metals.

Hot working temperatures should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degree F, where furthermore, annealing should be performed at a temperature between 1300 Degree F and 1600 Degree F. The lower carbon content of Alloy 200 Sheets from Venus Special Metals makes the material resistant to graphitization and therefore less subject to embrittlement.

Care should be taken when choosing the anneal temperature and time at temperature for this can greatly influence the mechanical properties and structure of the material. Alloy 200 Plates offered by Venus Special Metals are approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. When operating temperatures are expected to exceed 600 Degree F, carbon content becomes critical.

Nickel 200 Coils has good mechanical properties and excellent resistance to many corrosive environments. Venus Special Metals also offer these Alloy 200 Coils in different sizes, shapes and designs as per clients’ specifications at reasonable price.

UNS N02200 NICKEL ALLOY SHIM SHEET, NICKEL ALLOY 200 PLATES, 200 NICKEL ALLOY COILS & 200 ALLOY FOILS MANUFACTURER IN INDIA

NICKEL ALLOY 200 SHEETS, PLATES & COILS SPECIFICATION

Standards ASTM B161, B162, B163, B725, B730 / ASME SB161, SB162, SB163, SB725, SB730
Sheet & Plate in Form of Coils, Foils, Flats, Strip, Blank (Circle), Ring (Flange) & Perforated Sheet Etc.

200 HIGH NICKEL ALLOY SHEETS, ALLOY 200 PLATES, NICKEL 200 COILS SPECIFICATION:

Specification ASTM / ASME SB 168
Grade Nickel Alloy 200, UNS N02200, Werkstoff Nr. 2.4066/68
Type Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc.
Thickness 0.3mm To 200mm
Width
200mm to 3000mm
Length 500mm to 12000mm
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc
Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

EQUIVALENT GRADES OF HIGH NICKEL ALLOY 200 PLATES, SHEETS & COILS:

STANDARD WERKSTOFF NR. UNS JIS AFNOR BS GOST EN
Nickel 200 2.4066 N02200 NW 2200 N-100M NA 11 НП-2 Ni 99.2

NICKEL ALLOY 200 PERFORATED SHEET, ALLOY 200 CHEQUERED PLATE, UNS N02200 SHEET, 200 NICKEL COILS, 200 ALLOY FOILS & ALLOY 200 COILS SUPPLIER & EXPORTER IN INDIA.

HIGH NICKEL ALLOY 200 PLATES, SHEETS & COILS CHEMICAL COMPOSITION:

Grade C Mn Si S Cu Fe Ni
Nickel 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

200 HIGH NICKEL ALLOY PLATES, SHEETS & COILS MECHANICAL PROPERTIES:

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

AVAILABLE TYPES OF 200 HIGH NICKEL ALLOY COILS, NICKEL ALLOY 200 SHEETS & ALLOY 200 PLATES

  • Nickel Alloy 200 Plates
  • Alloy 200 Rolls
  • 200 Alloy Ring
  • Alloy UNS N02200 Blank
  • 200 Nickel Alloy Coils
  • UNS N02200 Coils
  • 200 Nickel Hot Rolled Plates
  • 200 Nickel Alloy Sheets
  • Alloy 200 Chequered Plate
  • Nickel Alloy 200 Circles
  • Alloy 200 Flat
  • Nickel Alloy 200 Profile
  • UNS N02200 Plates
  • Alloy 200 Cold Rollded Plate
  • Alloy 200 Shim Sheet
  • Nickel 200 Perforated Sheet
  • Alloy 200 Coils
  • Nickel 200 Strips
  • Alloy 200 Foils
  • UNS N02200 Sheets
  • Nickel 200 Polished Plates