SHEETS, PLATES & COILS

201 NICKEL SHEETS, NICKEL ALLOY 201 PLATES & ALLOY 201 COILS

Venus Special Metals is one of the expertise trader & exporter of high quality Nickel 201 Sheets , which is a soft, malleable, and ductile metal with very high thermal and electrical conductivity. It offered in forged, hot rolled as well as cold worked conditions in required dimensional finish.

These Nickel 201 Plates offered by Venus Special Metals are available in Hard, Half – Hard as well as in Soft conditions and are perfect for use in electrical applications. The softness of it partly explains its high electrical conductivity and high thermal conductivity, second highest among pure metals at room temperature.

Alloy 201 Sheets does not react with water, but it does slowly react with atmospheric oxygen to form a layer of brown – black copper oxide which, unlike the rust that forms on iron in moist air, protects the underlying metal from further corrosion (passivation). This is because the resistivity to electron transport in metals at room temperature originates primarily from scattering of electrons on thermal vibrations of the lattice, which are relatively weak in a soft metal.

Alloy 201 Plates offered by Venus Special Metals are demanded for their superior conductivity and for properties like crack resistance and free bend – ability. The maximum permissible current density of copper in open air is approximately of cross-sectional area, above which it begins to heat excessively. Venus Special Metals also offer these Nickel 201 Coils in different sizes, shapes and designs as per clients’ specifications at reasonable price.

UNS N02201 NICKEL ALLOY SHIM SHEET, NICKEL ALLOY 201 PLATES, 201 NICKEL ALLOY COILS & 201 ALLOY FOILS MANUFACTURER IN INDIA

NICKEL ALLOY 201 SHEETS, PLATES & COILS SPECIFICATION

Standards ASTM B161, B162, B163, B725, B730 / ASME SB161, SB162, SB163, SB725, SB730
Sheet & Plate in Form of Coils, Foils, Flats, Strip, Blank (Circle), Ring (Flange) & Perforated Sheet Etc.
 

201 HIGH NICKEL ALLOY SHEETS, ALLOY 201 PLATES, NICKEL 201 COILS SPECIFICATION:

Specification ASTM / ASME SB 168
Grade Nickel Alloy 201, UNS N02201, Werkstoff Nr. 2.4068
Type Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc.
Thickness 0.3mm To 200mm
Width
200mm to 3000mm
Length 500mm to 12000mm
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc
Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

EQUIVALENT GRADES OF HIGH NICKEL ALLOY 200 PLATES, SHEETS & COILS:

STANDARD WERKSTOFF NR. UNS JIS AFNOR BS GOST EN
Nickel 201 2.4066 N02201 NW 2201 N-100M NA 12 НП-2 Ni 99.2

NICKEL ALLOY 201 PERFORATED SHEET, ALLOY 201 CHEQUERED PLATE, UNS N02201 SHEET, 201 NICKEL COILS, 201 ALLOY FOILS & ALLOY 201 COILS SUPPLIER & EXPORTER IN INDIA.

HIGH NICKEL ALLOY 201 PLATES, SHEETS & COILS CHEMICAL COMPOSITION:

Grade C Mn Si S Cu Fe Ni
Nickel 201 0.02 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

201 HIGH NICKEL ALLOY PLATES, SHEETS & COILS MECHANICAL PROPERTIES:

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel 201 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %
 

AVAILABLE TYPES OF 201 HIGH NICKEL ALLOY COILS, NICKEL ALLOY 201 SHEETS & ALLOY 201 PLATES

  • Nickel Alloy 201 Plates
  • Alloy 201 Rolls
  • 201 Alloy Ring
  • Alloy UNS N02201 Blank
  • 201 Nickel Alloy Coils
  • UNS N02201 Coils
  • 201 Nickel Hot Rolled Plates
  • 201 Nickel Alloy Sheets
  • Alloy 201 Chequered Plate
  • Nickel Alloy 201 Circles
  • Alloy 201 Flat
  • Nickel Alloy 201 Profile
  • UNS N02201 Plates
  • Alloy 201 Cold Rollded Plate
  • Alloy 201 Shim Sheet
  • Nickel 201 Perforated Sheet
  • Alloy 201 Coils
  • Nickel 201 Strips
  • Alloy 201 Foils
  • UNS N02201 Sheets
  • Nickel 201 Polished Plates