SHEETS, PLATES & COILS

601 INCONEL SHEETS, INCONEL ALLOY 601 PLATES & ALLOY 601 COILS

Venus Special Metals is one of the prominent supplier and trader of Inconel 601 Sheets , where the substantial chromium content gives the alloy outstanding resistance to oxidizing chemicals and to high-temperature oxidizing gases. Examples are tail-gas reheaters used in production of nitric acid and steam-heating coils in nitric- plus-hydrochloric acid solutions used for pickling stainless steels and reprocessing nuclear fuels. In various types of high-temperature water, Inconel 601 Plates offered by Venus Special Metals displays low corrosion rates and excellent resistance to stress-corrosion cracking.

Work hardening, precipitation hardening, and solid-solution hardening are performed for strengthening the super alloys. Mechanical properties of Inconel 601 Coils vary with product form and temper. It has excellent quality to fully satisfy customer’s requirements. Alloy 601 Sheets offered by Venus Special Metals is often used in high temperature burners, duct work, petrochemical heaters and furnaces.

The alloy has excellent resistance to stress – corrosion cracking. Alloy 601 Plates does work – harden during machining and has higher strength and “gumminess” not typical of steels. Conventional machining techniques used for iron based alloys may be used. Most of the applications of Alloy 601 Coils from Venus Special Metals are in the chemical industries.

The addition of the small amount of palladium is to ennoble the corrosion potential of Ti, thus improving the corrosion resistance of titanium in reducing environments. Venus Special Metals also offer these sheets, plates and coils in different sizes, shapes and designs as per clients’ specifications at reasonable price.

UNS N06601 INCONEL ALLOY SHIM SHEET, INCONEL ALLOY 601 PLATES, 601 INCONEL ALLOY COILS & 601 ALLOY FOILS MANUFACTURER IN INDIA

INCONEL 601 SHEETS, PLATES & COILS SPECIFICATION

Standards ASTM B168, B424, B443 / ASME SB168, SB424, SB443
Sheet & Plate in Form of Coils, Foils, Flats, Strip, Blank (Circle), Ring (Flange) & Perforated Sheet Etc.
 

601 INCONEL ALLOY SHEETS, ALLOY 601 PLATES, INCONEL 601 COILS SPECIFICATION:

Grade Inconel Alloy 601, UNS N06601, Werkstoff Nr. 2.4851
Type Sheet, Plates, Coils, Flat, Strips, Profile, Blank ,Circle, Ring etc.
Thickness 0.3mm To 200mm
Width
200mm to 3000mm
Length 500mm to 12000mm
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc
Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.

EQUIVALENT GRADES OF INCONEL ALLOY 601 PLATES, SHEETS & COILS:

STANDARD WERKSTOFF NR. UNS GOST OR BS EN AFNOR JIS
Inconel 601 2.4851 N06601 XH60BT ЭИ868 NA 49 NiCr23Fe NC23FeA NCF 601

INCONEL ALLOY 601 PERFORATED SHEET, ALLOY 601 CHEQUERED PLATE, UNS N06601 SHEET, 601 INCONEL COILS, 601 ALLOY FOILS & ALLOY 601 COILS SUPPLIER & EXPORTER IN INDIA.

INCONEL ALLOY 601 PLATES, SHEETS & COILS CHEMICAL COMPOSITION:

Grade C Mn Si S Cu Fe Ni Cr
Inconel 601 0.10 max 1.00 max 0.50 max 0.015max 1.00 max Balance 58.0 – 63.0 21.0 – 25.0

601 INCONEL ALLOY PLATES, SHEETS & COILS MECHANICAL PROPERTIES:

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Inconel 601 8.1 g/cm3 1411 °C (2571 °F) Psi – 80,000 , MPa – 550 Psi – 30,000 , MPa – 205 30 %
 

AVAILABLE TYPES OF 601 INCONEL ALLOY COILS, INCONEL ALLOY 601 SHEETS & ALLOY 601 PLATES

  • Inconel Alloy 601 Plates
  • Alloy 601 Rolls
  • 601 Alloy Ring
  • Alloy UNS N06601 Blank
  • 601 Inconel Alloy Coils
  • UNS N06601 Coils
  • 601 Inconel Hot Rolled Plates
  • 601 Inconel Alloy Sheets
  • Alloy 601 Chequered Plate
  • Inconel Alloy 601 Circles
  • Alloy 601 Flat
  • Inconel Alloy 601 Profile
  • UNS N06601 Plates
  • 601 Alloy Cold Rolled Plates
  • Alloy 601 Shim Sheet
  • Inconel 601 Perforated Sheet
  • Alloy 601 Coils
  • Inconel 601 Strips
  • Alloy 601 Foils
  • UNS N06601 Sheets
  • 601 Inconel Polished Plates