SHEETS, PLATES & COILS

STAINLESS STEEL 304L SHEETS, 304L STEEL PLATES & STEEL 304L COILS

Venus Special Metals is one of the reputed producer and wholesaler of Stainless Steel 304L Sheets , which is an austenitic steel possessing a minimum of 18 % chromium and 8 % nickel, combined with a maximum of 0.08 % carbon. Just like standard steel, stainless can get marked up by fingerprints and grease, develop discoloration, and eventually rust.

Stainless Steel 304L Plates offered by Venus Special Metals is nonmagnetic steel which cannot be hardened by heat treatment, but instead must be cold worked to obtain higher tensile strengths. As a result, this alloy can be used in the as-welded condition, even in severe corrosive conditions.

SS 304L Sheets often eliminates the necessity of annealing weldments except for applications specifying stress relief. It has slightly lower mechanical properties than Type 304, which is further non – hardenable by heat treatment. Annealing of heat in SS 304L Plates, which are offered by Venus Special Metals, can be performed up to 1900 Degree F – 2050 Degree F (1038 Degree C – 1121 Degree C), and then cool rapidly.

Thin strip sections may be air cooled, but heavy sections should be water quenched to minimize exposure in the carbide precipitation region. Alloy 304L Sheets Plates has very good drawability, which can withstand much more time and abuse before showing signs of wear. Venus Special Metals also offer these 304L Stainless Steel Sheets Plates in different sizes, shapes and designs as per clients’ specifications at reasonable price.

304L STAINLESS STEEL SHIM SHEET, STEEL 304L PLATES, STAINLESS STEEL 304L COILS & FOILS, UNS S30403 STEEL HAIR LINE SHEETS MANUFACTURER IN INDIA

EQUIVALENT GRADES OF 304L STAINLESS STEEL PLATES, SHEETS & COILS:

STANDARDWERKSTOFF NR.UNSGOSTENJISAFNORBS
SS 304L1.4306/1.4307S3040303Х18Н11X2CrNi18-9 / X2CrNi19-11SUS 304LZ3CN18‐10304S11

304L STAINLESS STEEL PLATES, 304L STEEL SHEETS, & 304L STEEL COILS SPECIFICATION:

GradeStainless Steel 304L / UNS S30403
SpecificationASTM A240 / ASME SA240
TypesSheets, Plates, Coils, Strip, Flats, Profile, Blank, Circle, Ring etc
FormStainless Steel Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Etched Sheet, Embossed Sheet, Brush Sheet, No 4 Matt Pvc Sheet, Hair Line Sheet, etc
Thickness0.3mm To 200mm
Width
200mm to 3000mm
Length500mm to 12000mm
FinishHot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc

304L STAINLESS STEEL PERFORATED SHEET, STEEL CHEQUERED PLATE, STEEL 304L SHEET, STEEL 304L COILS, UNS S30403 STEEL FOILS & COILS, 304L STAINLESS STEEL NO 4 PVC SHEETS SUPPLIER & EXPORTER IN INDIA.

304L STAINLESS STEEL PLATES, SHEETS & COILS CHEMICAL COMPOSITION:

GradeCMnSiPSCrMoNiN
SS 304L0.035 max2 max1.0 max0.045 max0.030 max18 – 208 – 13

STAINLESS STEEL 304L PLATES, SHEETS & COILS MECHANICAL PROPERTIES:

DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation
8.0 g/cm31400 °C (2550 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %
 

AVAILABLE TYPES OF 304L SS COILS, 304L SS FOILS, 304L SS PLATES & 304L SS SHEETS

  • 304L Stainless Steel Plates
  • Steel 304L Rolls
  • UNS S30403 Ring
  • Steel 304L Blank
  • 304L SS Coils
  • UNS S30403 Coils
  • SS UNS S30403 Polished Plates
  • Steel 304L Sheets
  • 304L Steel Chequered Plate
  • SS 304L Circles
  • Steel 304L Flat
  • Stainless 304L Profile
  • UNS S30403 Steel Plates
  • 304L SS Cold Rolled Plates
  • SS 304L Shim Sheet
  • 304L Steel Perforated Sheet
  • Stainless 304L Coils
  • 304L Steel Strips
  • Stainless Steel 304L Foils
  • UNS S30403 Steel Sheets
  • SS 304L Hot Rolled Plates