SHEETS, PLATES & COILS

STAINLESS STEEL 317 SHEETS, 317 STEEL PLATES & STEEL 317 COILS

Venus Special Metals is one of the well-known suppliers of Stainless Steel 317 Sheets , which are considerably more resistant than any of the other chromium – nickel types to solutions of sulphuric acid. One known exception is highly oxidizing acids such as nitric acid to which the molybdenum bearing stainless steels are less resistant. Where condensation of sulphur – bearing gases occurs, these Stainless Steel 317 Plates are much more resistant than other types of stainless steels.

In sulphuric acid solutions, the acid concentration has a strong influence on the rate of attack. These SS 317 Sheets is susceptible to precipitation of chromium carbides in grain boundaries when exposed to temperatures in the 800 Degree F to 1500 Degree F (425 Degree C to 815 Degree C) range. Resistance of austenitic stainless steels to pitting and / or crevice corrosion in the presence of chloride or other halide ions is enhanced by higher chromium (Cr) and molybdenum (Mo) content.

Austenitic SS 317 Plates are susceptible to stress corrosion cracking (SCC) in halide environments. Heat treatment may be necessary during or after fabrication to remove the effects of cold forming or to dissolve precipitated chromium carbides resulting from thermal exposures. The austenitic 317 Stainless Steel Sheets are provided in the mill-annealed condition ready for use. Venus Special Metals also offer these 317 Stainless Steel Plates in different sizes, shapes and designs as per clients’ specifications at reasonable price.

317 STAINLESS STEEL SHIM SHEET, STEEL 317 PLATES, STAINLESS STEEL 317 COILS & FOILS, UNS S31700 STEEL HAIR LINE SHEETS MANUFACTURER IN INDIA

EQUIVALENT GRADES OF 317 STAINLESS STEEL PLATES, SHEETS & COILS:

STANDARD WERKSTOFF NR. UNS
SS 317 1.4449 S31700

317 STAINLESS STEEL PLATES, 317 STEEL SHEETS, & 317 STEEL COILS SPECIFICATION:

Grade Stainless Steel 317 / UNS S31700
Specification ASTM A240 / ASME SA240
Types Sheets, Plates, Coils, Strip, Flats, Profile, Blank, Circle, Ring etc
Form Stainless Steel Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Etched Sheet, Embossed Sheet, Brush Sheet, No 4 Matt Pvc Sheet, Hair Line Sheet, etc
Thickness 0.3mm To 200mm
Width
200mm to 3000mm
Length 500mm to 12000mm
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc

317 STAINLESS STEEL PERFORATED SHEET, STEEL CHEQUERED PLATE, STEEL 317 SHEET, STEEL 317 COILS, UNS S31700 STEEL FOILS & COILS, 317 STAINLESS STEEL NO 4 PVC SHEETS SUPPLIER & EXPORTER IN INDIA.

317 STAINLESS STEEL PLATES, SHEETS & COILS CHEMICAL COMPOSITION:

Grade C Mn Si P S Cr Mo Ni Fe
SS 317 0.08 max 2 max 1.00 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.845 min

STAINLESS STEEL 317 PLATES, SHEETS & COILS MECHANICAL PROPERTIES:

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
 

AVAILABLE TYPES OF 317 SS COILS, 317 SS FOILS, 317 SS PLATES & 317 SS SHEETS

  • 317 Stainless Steel Plates
  • Steel 317 Rolls
  • UNS S31700 Ring
  • Steel 317 Blank
  • 317 SS Coils
  • UNS S31700 Coils
  • SS UNS S31700 Polished Plates
  • Steel 317 Sheets
  • 317 Steel Chequered Plate
  • SS 317 Circles
  • Steel 317 Flat
  • Stainless 317 Profile
  • UNS S31700 Steel Plates
  • 317 SS Cold Rolled Plates
  • SS 317 Shim Sheet
  • 317 Steel Perforated Sheet
  • Stainless 317 Coils
  • 317 Steel Strips
  • Stainless Steel 317 Foils
  • UNS S31700 Steel Sheets
  • SS 317 Hot Rolled Plates