SHEETS, PLATES & COILS

STAINLESS STEEL 317L SHEETS, 317L STEEL PLATES & STEEL 317L COILS

Venus Special Metals is one of the pioneer dealers of Stainless Steel 317L Sheets , which is a molybdenum bearing, low carbon content “L” grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes.

Stainless Steel 317L Plates is non – magnetic in the annealed condition but may become slightly magnetic as a result of welding. Increased levels of chromium, nickel and molybdenum compared to 316L stainless steel improve resistance to chloride pitting and general corrosion. SS 317L Sheets has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Resistance increases with molybdenum alloy content.

SS 317L Plates is resistant to sulphuric acid concentrations up to 5 percent at temperatures as high as 120 Degree F (49 Degree C). At temperatures under 100 Degree F (38 Degree C), this alloy has excellent resistance to solutions of higher concentration. In processes where condensation of sulphur – bearing gases occurs, 317L Stainless Steel Sheets is much more resistant to attack at the point of condensation than conventional alloy 316.

However, service tests are recommended to account for the effects of specific operating conditions that may affect corrosion behaviour. Venus Special Metals also offer these 317L Stainless Steel Plates in different sizes, shapes and designs as per clients’ specifications at reasonable price.

317L STAINLESS STEEL SHIM SHEET, STEEL 317L PLATES, STAINLESS STEEL 317L COILS & FOILS, UNS S31703 STEEL HAIR LINE SHEETS MANUFACTURER IN INDIA

EQUIVALENT GRADES OF 317L STAINLESS STEEL PLATES, SHEETS & COILS:

STANDARD WERKSTOFF NR. UNS
SS 317L 1.4438 S31703

317L STAINLESS STEEL PLATES, 317L STEEL SHEETS, & 317L STEEL COILS SPECIFICATION:

Grade Stainless Steel 317L / UNS S31703
Specification ASTM A240 / ASME SA240
Types Sheets, Plates, Coils, Strip, Flats, Profile, Blank, Circle, Ring etc
Form Stainless Steel Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Etched Sheet, Embossed Sheet, Brush Sheet, No 4 Matt Pvc Sheet, Hair Line Sheet, etc
Thickness 0.3mm To 200mm
Width
200mm to 3000mm
Length 500mm to 12000mm
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc

317L STAINLESS STEEL PERFORATED SHEET, STEEL CHEQUERED PLATE, STEEL 317L SHEET, STEEL 317L COILS, UNS S31703 STEEL FOILS & COILS, 317L STAINLESS STEEL NO 4 PVC SHEETS SUPPLIER & EXPORTER IN INDIA.

317L STAINLESS STEEL PLATES, SHEETS & COILS CHEMICAL COMPOSITION:

Grade C Mn Si P S Cr Mo Ni Fe
SS 317L 0.035 max 2 max 1.00 max 0.045 max 0.030 max 18.00 – 20.00 3.00 – 4.00 11.00 – 15.00 57.89 min

STAINLESS STEEL 317L PLATES, SHEETS & COILS MECHANICAL PROPERTIES:

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
7.9 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
 

AVAILABLE TYPES OF 317L SS COILS, 317L SS FOILS, 317L SS PLATES & 317L SS SHEETS

  • 317L Stainless Steel Plates
  • Steel 317L Rolls
  • UNS S31703 Ring
  • Steel 317L Blank
  • 317L SS Coils
  • UNS S31703 Coils
  • SS UNS S31703 Polished Plates
  • Steel 317L Sheets
  • 317L Steel Chequered Plate
  • SS 317L Circles
  • Steel 317L Flat
  • Stainless 317L Profile
  • UNS S31703 Steel Plates
  • 317L SS Cold Rolled Plates
  • SS 317L Shim Sheet
  • 317L Steel Perforated Sheet
  • Stainless 317L Coils
  • 317L Steel Strips
  • Stainless Steel 317L Foils
  • UNS S31703 Steel Sheets
  • SS 317L Hot Rolled Plates