SHEETS, PLATES & COILS

STAINLESS STEEL 347 SHEETS, 347 STEEL PLATES & STEEL 347 COILS

Venus Special Metals is the prominent dealer & supplier in Stainless Steel 347 Sheets , which is a columbium / tantalum stabilized austenitic chromium – nickel stainless steel. Since these elements have a stronger affinity for carbon than chromium, columbium – tantalum carbides precipitate within the grains instead of forming at the grain boundaries.

Stainless Steel 347 Plates is stabilized against chromium carbide formation by the addition of columbium and tantalum. It should be considered for applications requiring intermittent heating between 800 Degree F (427 Degree C) and 1650 Degree F (899 Degree C) or for welding under conditions which prevent a post-weld anneal.

SS 347 Sheets is non-magnetic, where columbium – tantalum carbides precipitate within the grains instead of forming at the grain boundaries. However, the hardenability of this steel can be minimized by the use of constant positive feeds and slow speeds. Machining grade SS 347 Plates is slightly tougher than that of grade 304 steel. Although this material requires higher initial forces than 304 stainless, it is quite tough and ductile and can be readily stamped, blanked, spun and drawn.

347 Stainless Steel Sheets does not harden by heat treating. Elevated properties may only be obtained through cold reduction. The high sulphur content of this alloy also has a detrimental impact on hot workability. Venus Special Metals also offer these 347 Stainless Steel Plates in different sizes, shapes and designs as per clients’ specifications at reasonable price.

347 STAINLESS STEEL SHIM SHEET, STEEL 347 PLATES, STAINLESS STEEL 347 COILS & FOILS, UNS S34700 STEEL HAIR LINE SHEETS MANUFACTURER IN INDIA

EQUIVALENT GRADES OF 347 STAINLESS STEEL PLATES, SHEETS & COILS:

STANDARD WERKSTOFF NR. UNS
SS 347 1.4550 S34700

347 STAINLESS STEEL PLATES, 347 STEEL SHEETS, & 347 STEEL COILS SPECIFICATION:

Grade Stainless Steel 347 / UNS S34700
Specification ASTM A240 / ASME SA240
Types Sheets, Plates, Coils, Strip, Flats, Profile, Blank, Circle, Ring etc
Form Stainless Steel Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Etched Sheet, Embossed Sheet, Brush Sheet, No 4 Matt Pvc Sheet, Hair Line Sheet, etc
Thickness 0.3mm To 200mm
Width
200mm to 3000mm
Length 500mm to 12000mm
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc

347 STAINLESS STEEL PERFORATED SHEET, STEEL CHEQUERED PLATE, STEEL 347 SHEET, STEEL 347 COILS, UNS S34700 STEEL FOILS & COILS, 347 STAINLESS STEEL NO 4 PVC SHEETS SUPPLIER & EXPORTER IN INDIA.

347 STAINLESS STEEL PLATES, SHEETS & COILS CHEMICAL COMPOSITION:

Grade C Mn Si P S Cr Cb Ni Fe
SS 347 0.08 max 2.0 max 1.0 max 0.045 max 0.030 max 17.00 – 20.00 10xC – 1.10 9.00 – 13.00 62.74 min

STAINLESS STEEL 347 PLATES, SHEETS & COILS MECHANICAL PROPERTIES:

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.0 g/cm3 1454 °C (2650 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %
 

AVAILABLE TYPES OF 347 SS COILS, 347 SS FOILS, 347 SS PLATES & 347 SS SHEETS

  • 347 Stainless Steel Plates
  • Steel 347 Rolls
  • UNS S34700 Ring
  • Steel 347 Blank
  • 347 SS Coils
  • UNS S34700 Coils
  • SS UNS S34700 Polished Plates
  • Steel 347 Sheets
  • 347 Steel Chequered Plate
  • SS 347 Circles
  • Steel 347 Flat
  • Stainless 347 Profile
  • UNS S34700 Steel Plates
  • 347 SS Cold Rolled Plates
  • SS 347 Shim Sheet
  • 347 Steel Perforated Sheet
  • Stainless 347 Coils
  • 347 Steel Strips
  • Stainless Steel 347 Foils
  • UNS S34700 Steel Sheets
  • SS 347 Hot Rolled Plates