SHEETS, PLATES & COILS
- Nickel Alloy 200 Sheets & Plates
- Nickel Alloy 201 Sheets & Plates
- Monel Alloy 400 Sheets & Plates
- Monel Alloy K500 Sheets & Plates
- Inconel Alloy 600 Sheets & Plates
- Inconel Alloy 601 Sheets & Plates
- Inconel Alloy 625 Sheets & Plates
- Inconel Alloy 718 Sheets & Plates
- Inconel Alloy 800 Sheets & Plates
- Inconel Alloy 825 Sheets & Plates
- Alloy 20 Sheets & Plates
- Hastelloy B2 Sheets & Plates
- Hastelloy C22 Sheets & Plates
- Hastelloy C276 Sheets & Plates
- 304 Stainless Steel Sheets, Plates
- 304L Stainless Steel Sheets, Plates
- 304H Stainless Steel Sheets, Plates
- 310 Stainless Steel Sheets, Plates
- 310H Stainless Steel Sheets, Plates
- 316 Stainless Steel Sheets, Plates
- 316L Stainless Steel Sheets, Plates
- 316Ti Steel Sheets, Plates
- 316H Stainless Steel Sheets, Plates
- 317 Stainless Steel Sheets, Plates
- 317L Stainless Steel Sheets, Plates
- 321 Stainless Steel Sheets, Plates
- 347 Stainless Steel Sheets, Plates
- 904L Stainless Steel Sheets, Plates
90/10 COPPER SHEETS, 90/10 COPPER PLATES & 90/10 COPPER COILS
Venus Special Metals is one of the prominent leader of Cu-Ni 90 / 10 Sheets and Plates , which have high resistance to crevice corrosion, stress corrosion cracking and hydrogen embrittlement that can be troublesome to other alloy systems. In seawater, the alloys have excellent corrosion rates which remain low as long as the maximum design flow velocity is not exceeded, where this velocity depends on geometry and pipe diameter.
Cu-Ni 90 / 10 Plates offered by Venus Special Metals naturally form a thin protective surface layer over the first several weeks of exposure to seawater and this provides its on-going resistance. Additionally, they have a high inherent bio-fouling resistance to attachment by macrofoulers (e.g. sea-grasses and molluscs) living in the seawater.
To use this property to its full potential, Cupronickel 90 / 10 Sheets from Venus Special Metals needs to be free of the effects of, or insulated from, any form of cathode protection. It is important, therefore, to avoid exposure to such conditions, particularly during commissioning and refit while the surface films are maturing.
Cupronickel 90 / 10 Plates offered by Venus Special Metals can show high corrosion rates in polluted or stagnant seawater when sulphides or ammonia are present. Ferrous sulphate dosing to sea water systems can provide improved resistance. Venus Special Metals also offer these Copper Nickel 90 / 10 Sheets Plates in different sizes, shapes and designs as per clients’ specifications at reasonable price.
90/10 COPPER NICKEL SHIM SHEET, UNS C70600 CUPRO NICKEL PLATES, CU-NI 90/10 COILS & FOILS MANUFACTURER IN INDIA
![](https://venusspecialmetals.com/wp-content/uploads/2021/11/cu-ni-90-10-plates-1.jpg)
![](https://venusspecialmetals.com/wp-content/uploads/2021/11/cu-ni-90-10-sheets-1.jpg)
![](https://venusspecialmetals.com/wp-content/uploads/2021/11/cu-ni-90-10-coils-1.jpg)
COPPER 90/10 SHEETS, PLATES & COILS SPECIFICATION
Grades | Copper alloy plate C101, Copper alloy plate C102, Copper alloy plate C103, Copper alloy plate B170, Copper alloy plate B379 – UNS C70600 (Cu-Ni 90/10) |
Material | Copper Chromium, Copper Beryllium, Tungsten Copper |
Specification | ASTM / ASME SB 62 |
Thickness | 0.3mm To 200mm |
Width | 200mm to 3000mm |
Length | 500mm to 12000mm |
Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, Satin (Met with Plastic Coated), 8K, mirror, etc |
Form | Coils, Foils, Shim Sheet, Rolls, Perforated Sheet, Chequered Plate |
Features | High tensile strength, Less maintenance, Precise engineering |
Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
UNS C70600 COPPER PERFORATED SHEET, 90/10 COPPER ALLOY CHEQUERED PLATE, CU-NI 90/10 SHEET, 90/10 CUPRO NICKEL COILS, CU-NI 90/10 FOIL SUPPLIER & C70600 COPPER PLATES EXPORTER IN INDIA.
COPPER 90/10 PLATES, SHEETS & COILS CHEMICAL COMPOSITION:
Grade | Cu | Mn | Pb | Ni | Fe | Zn |
Cupro Nickel 90/10 | 88.6 min | 1.0 max | 0.05 max | 9-11 max | 1.8 max | 1 max |
90/10 COPPER PLATES, SHEETS & COILS MECHANICAL PROPERTIES:
Grade | Cu | Mn | Pb | Ni | Fe | Zn |
Cupro Nickel 90/10 | 88.6 min | 1.0 max | 0.05 max | 9-11 max | 1.8 max | 1 max |
EQUIVALENT GRADES OF COPPER 90/10 PLATES, SHEETS & COILS:
STANDARD | WERKSTOFF NR. | UNS |
Cupro Nickel 90/10 | 2.0872 | C70600 |
AVAILABLE TYPES OF 90/10 COPPER ALLOY SHEETS, 90/10 COPPER ALLOY PLATES & 90/10 COPPER ALLOY COILS
- Copper 90/10 Plates
- Cupro Nickel 90/10 Rolls
- Cu-Ni 90/10 Ring
- Copper UNS C70600 Blank
- 90/10 Copper Coils
- UNS C70600 Coils
- 90/10 Copper Hot Rolled Plates
- Cupro Nickel 90/10 Sheets
- Cu-Ni 90/10 Chequered Plate
- 90/10 Copper Circles
- Cupro Nickel 90/10 Flat
- 90/10 Copper Profile
- UNS C70600 Plates
- Copper 90/10 Cold Rolled Plates
- 90/10 Copper Shim Sheet
- Cupro Nickel 90/10 Perforated Sheet
- 90/10 Copper Coils
- 90/10 Cupro Nickel Strips
- Copper Alloy 90/10 Foils
- Cu-Ni 90/10 Polished Plates