INCONEL ALLOY 625 / ALLOY UNS N06625 / INCOLOY ALLOY WNR 2.4856
A tri-combination of nickel-chromium-molybdenum alloy with toting of niobium which acts with molybdenum to tighten the alloy’s matrix. For high its strength and aqueous corrosion resistance, nickel alloy is used. Alloy 625 has exceptional lassitude strength and stress-corrosion cracking resistance to the chloride ions.
Inconel 625 gives high resistance to opposing and cleft deterioration, making it ultimate alloy in chemical dispensation, nautical engineering, oil and gas, and offshore productions. Widely available in sheets, plates, bars, pipes & tubes, wires.
INCONEL 625 GRADE MANUFACTURER, INCOLOY ALLOY UNS N06625 SUPPLIERS, ALLOY WNR 2.4856 EXPORTERS IN INDIA – LIMITING CHEMICAL COMPOSITION %
| Ni | C | Ti | Cr | Mn | P | Mo | Si | Co | Nb+Ta | S | Fe | Ag |
| 58.00% min | 0.10% max | 0.40% max | 20.00-23.00% | 0.50% max | 0.01% max | 8.00-10.00% | 0.50% max | 1.00% max | 3.15-4.15% | 0.01% max | 5.00% max | 0.40% max |
KEY PROPERTIES (IN ANNEALED CONDITION)
| Tensile strength: | Yield strength | Elongation | Hardness |
| 120.00–140.00 | 60.00–75.00 | 55.00–30.00% | 145.00–220.00 |
SPECIFICATIONS AND DESIGNATIONS
| UNS | DIN | Werkstoff Nr. | SAE AMS | NACE | AFMOR |
| N06625 | 17744,17750,-17752,17754 | 2.4856 | 5561,5599,5666,5337 | MR 0175 | NC 22 0NB |
FLANGE ASTM B564, OS-LOK® TUBE FITTINGS, PIPE FITTINGS ASTM B366, TUBE ASTM B444 B704, ROUND BAR ASTM B446, PIPE ASTM B444 B705, SHEET PLATE ASTM B443
AVAILABLE TYPES OF INCONEL 625 / UNS N06625 GRADES PRODUCTS
INCONEL 625 PIPES & TUBES
INCONEL 625 FLANGES
INCONEL 625 PIPE FITTINGS
INCONEL 625 FORGED FITTINGS
INCONEL 625 FASTENERS
INCONEL 625 TUBE FITTINGS
INCOLOY 625 ROUND BARS
